Product ID:FEL-POXY FLOOR FIXER, 2421-85 PT B
MSDS Date:10/23/1985
FSC:8030
NIIN:00F009300
MSDS Number: BGZSY

Emergency Phone: (312) 674-7700

Info Phone: (312) 674-7700

Preparer: JOHN MICHNA

Cage: DO270

Telephone: 312-674-7700/312-761-4500

Cage: DO270

EPOXY RESIN

Fraction By Weight: 95%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION & SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION & SENSITIZATION.

First Aid:SKIN: WASH W/SOAP & WATER. IF IRRITATION OCCURS, CONSULT
PHYSICIAN. EYES: FLUSH W/TEPID WATER FOR 15 MINS. CONSULT
PHYSICIAN. INHALATION: REMOVE TO FRESH AIR, KEEP WARM & QUIET,
CONSULT PHYSICIAN.

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:WATER FOG, DRY CHEMICALS, FOAM, CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:ABSORB W/INERT ABSORBENT MATERIAL. SWEEP/SCOOP
UP & PUT IN DISPOSAL CONTAINER. FLUSH AREA IMMEDIATELY W/PLENTY OF
WATER. PREVENT WASHING FROM ENTERING WATERWAY.

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. PRACTICE
REASONABLE CARE & CLEANLINESS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:USE A NIOSH-MESA APPROVED ORGANIC VAPOR
RESPIRATOR IF VENTILATION IS INADEQUATE.
Ventilation:LOCAL EXHAUST/MECHANICAL: ACCEPTABLE 50 F.P.M.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Other Protective Equipment:APRON/COVERALLS.
Work Hygienic Practices:PRACTICE REASONABLE CARE & CLEANLINESS.
Supplemental Safety and Health

Boiling Pt:B.P. Text:500F
Vapor Density:>1
Spec Gravity:1.18
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID, CHARACTETISTIC EPOXY RESIN ODOR.
Percent Volatiles by Volume:NEG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, BASES, AMINES & MERCAPTANS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:PYROLYSIS YIELDS CO, CO2,
HYDROCARBONS.
Conditions to Avoid Polymerization:PREMATURE REACTION W/ACIDS, AMINES,
MERCAPTANS & BASES.

Waste Disposal Methods:CONTROLLED INCINERATION/BURY IN A POSTED TOXIC
SUBSTANCES LANDFILL IN ACCORDANCE W/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.